Mitty Aurora Powder - Candy Floss

Nail aurora powder is made from chrome pigments, metal and glass plus fillers. The less filler you have like Mitty aurora powders, the shinier the result will be because fillers look dull. 

There are different type of powders like chrome powders, shimmer powders, and holographic powder. The difference in these are the pigment used which in return give you the different look. 

  1x Jar of Shimmer aurora powder 0.5g

  1x Storage pouch.

  2x Easy as applicators

1. Apply a base colour. The base can be normal nail polish or gel polish. Any dark colour is OK as each colour gives a different effect. We recommend black for the best result if you want the maximum mirror aurora nail design.

2. Apply none wipe gel top coat like Mitty Gloss Top Coat. Cure under a LED nail lamp for 10 seconds in Mitty 54W LED nail lamp. This step is important as the aurora powder needs a certain level of tackiness to stick to the top coat. If you under-cure the gel top coat, the powder will look dull and if you over-cure the gel top coat, the powder may not stick to the nail. 

3.Dip the colour side of the applicator in your Mitty aurora powder and then rub it onto your nail. You will need to apply a little pressure so you get the maximum mirror aurora powder nail design. 

4. Turn the applicator and use the white side to finalise the aurora nail design. This will give you an even shinier look.

5. Now take your Mitty Design Pro Angular fan brush, and wipe away the excess aurora powder. 

6. It is very important to apply a top coat otherwise the aurora powder will rub off. 

Handy hint: It’s easy to get the aurora powder everywhere, all over your actual finger. Before you even apply the aurora powder put on Flawless Finish by Mitty Mani tapes to minimise clean up.